www.wayfair.ca Opening: A Stylish and Functional DIY Magazine Rack Tired of magazines cluttering your coffee table? This step-by-step guide will show you how to build a simple yet elegant wooden magazine rack. It's a great weekend project that adds both organization and style to your living space.
Step 1: Gathering Your Materials First, you need to acquire the following materials. Accurate measurements are crucial for a clean and professional finished product.
- 1 piece of wood (e.g., pine, oak) for the base: 36" long x 12" wide x 3/4" thick
- 2 pieces of wood for the sides: 15" high x 12" wide x 3/4" thick
- 2 pieces of wood for the dividers: 15" high x 3" wide x 3/4" thick
- Wood glue
- Wood screws (1 1/4" length recommended)
- Sandpaper (various grits: 120, 220)
- Wood stain or paint (optional)
- Wood finish (e.g., polyurethane) (optional)
- Saw (circular saw, table saw, or hand saw)
- Drill with drill bits
- Screwdriver
- Measuring tape
- Pencil
- Clamps
- Safety glasses
- Dust mask
Step 2: Cutting the Wood Cut the wood according to the dimensions listed in the materials section. Accuracy is key here. Double-check your measurements before each cut. If you're using a hand saw, take your time to ensure straight cuts. If you don't have the tools or experience, consider having your local hardware store cut the wood for you.
Step 3: Assembling the Sides Apply wood glue along the bottom edge of each side piece. Position the side pieces on top of the base, ensuring they are flush with the edges. Clamp the side pieces to the base to hold them in place while the glue dries. Pre-drill pilot holes through the sides and into the base to prevent the wood from splitting. Secure the sides to the base with wood screws.
Step 4: Attaching the Dividers Measure and mark the desired locations for the dividers on the base. Even spacing between the dividers creates a more appealing look. Apply wood glue to the bottom edge of each divider. Position the dividers on the base at your marked locations. Pre-drill pilot holes through the base and into the dividers. Secure the dividers with wood screws.
Step 5: Sanding and Finishing Once the glue is dry, remove the clamps. Sand all surfaces of the magazine rack, starting with 120-grit sandpaper to remove any imperfections, then progressing to 220-grit sandpaper for a smooth finish. Wipe away any dust with a clean cloth. If desired, apply wood stain or paint to achieve your desired color. Let the stain or paint dry completely. Apply a wood finish (e.g., polyurethane) to protect the wood and enhance its appearance. Follow the manufacturer's instructions for application and drying time. Multiple coats of finish may be desired.
Conclusion: Enjoy Your New Magazine Rack Congratulations! You've successfully built a wooden magazine rack. Place it next to your favorite reading chair or in your living room to keep your magazines organized and within easy reach. You can customize the design further by adding decorative elements, such as stencils or carvings. Enjoy your stylish and functional creation!
Uniquewise Classic Wooden Magazine Rack & Reviews
www.wayfair.ca Lyndhurst Windsor Oak Wooden Magazine Rack
www.touchofclass.com Uniquewise Classic Wooden Magazine Rack & Reviews
www.wayfair.ca
